แหล่งข้อมูลที่เป็นอิสระ
Studio Technologies M545DC Dante Intercom Interface
Studio Technologies

Studio Technologies M545DC Dante Intercom Interface

☆☆☆☆☆ (0 reviews) MPN: M545DC|Studio Technologies
Lowest price (incl. delivery)
1 544,13 USD
Offers
1
Last updated
2 เดือนที่แล้ว
Full Compass Systems Product price 1 525,13 USD Delivery 19,00 USD รวม 1 544,13 USD ความพร้อมจำหน่าย Limited Updated 3 เดือนที่แล้ว View offer

ราคาและความพร้อมจำหน่ายอาจมีการเปลี่ยนแปลง อัปเดตล่าสุด: 24.08.2026 05:56.

MPN M545DC|Studio Technologies
Brand Studio Technologies
Studio Technologies
0,0
☆☆☆☆☆
0 reviews
5★ 0%
4★ 0%
3★ 0%
2★ 0%
1★ 0%

Product reviews

A good review: say what you use it for, what you like, what bothers you and how long you have had it.
Rating

Your review goes to moderation and appears once approved.

No reviews yet — be the first!
The Model 545DC Intercom Interface integrates two analog party-line (PL) intercom circuits and their user devices into Dante® audio-over-Ethernet applications. This cost-effective, reliable, and user-friendly solution is commonly used in theater, entertainment, and education. The Model 545DC directly supports both analog party-line (PL) and Dante and is fully compatible with Clear-Com®'s single-channel analog party-line (PL) products. Two hybrid circuits with automatic nulling action deliver exceptional audio quality and separation of send and receive audio. A simple Ethernet connection suffices for connecting the Model 545DC to Dante-compatible devices.Studio Technologies Features:Dante audio-over-Ethernet technologyIntegrated party-line (PL) intercom power sourcesAnalog hybrids with auto null capabilityInput and output level meteringExcellent audio qualityUses STcontroller for monitoring and configurationPoE and 12 volts DC poweringTable-top, portable, or optional rack-mount useStudio Technologies Specifications:Network Interface:Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) not supported)Power-over-Ethernet (PoE): Per IEEE 802.3afData Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s not supported)General Audio:Frequency Response (PL to Dante): –0.3 dB @ 100 Hz (–4.8 dB @ 20 Hz), –2 dB @ 8 kHz (–2.6 dB @ 10 kHz)Frequency Response (Dante to PL): –3.3 dB @ 100 Hz (–19 dB @ 20 Hz), –3.9 dB @ 8 kHz (–5.8 dB @ 10 kHz)Distortion (THD+N):Signal-to-Noise Ratio: >65 dB, A-weighted, measured at 1 kHz, Dante input to PL interface pin 2 (73 dB, PL interface pin 3)Party-Line (PL) Intercom Interfaces: 2Type: single-channel analog PL (XLR pin 1 common; XLR pin 2 DC; XLR pin 3 unbalanced audio)Compatibility: single-channel PL intercom systems such as those offered by Clear-Com®Power Source, XLR Pin 2: 28 volts DC, 150 mA maximumImpedance, XLR Pin 3 – Local PL Power Not Enabled: >10 k ohmsImpedance, XLR Pin 3 – Local PL Power Enabled: 200 ohmsAnalog Audio Level, XLR Pin 3: –14 dBu, nominal, +7 dBu maximumCall Light Signal Support, XLR Pin 3: DC voltage on pin 3; detects at >= 5 5 volts DC nominal; generates at 16 volts DC nominalMic Kill Signal Support, XLR Pin 2 – Local Power Enabled: momentary break in DC voltageParty-Line (PL) Hybrids: 2Topology: 3-section analog circuitry compensates for resistive, inductive, and capacitive loadsNulling Method: automatic upon user initiation, processor implements digital control of analog circuitry; settings stored in non-volatile memoryNulling Line Impedance Range: 120 to 350 ohmsNulling Cable Length Range: 0 to 3500 feetTrans-Hybrid Loss: >55 dB, typical at 800 HzMeters: 4Function: displays level of audio input and output channelsType: 5-segment LED, modified VU ballisticsConnectors:Party-Line (PL) Intercom: two, 3-pin male XLREthernet: Neutrik etherCON RJ45 jackExternal DC: 4-pin male XLRUSB: type A receptacle (used only for updating application firmware)Configuration: requires Studio Technologies' STcontroller software applicationSoftware Updating: USB flash drive used for updating application firmware; Dante Updater application used for updating Dante interface firmwareEnvironmental:Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)Humidity: 0 to 95%, non-condensingAltitude: not characterizedDimensions – Overall:8.70 inches wide (22.1 cm)1.72 inches high (4.4 cm)8.30 inches deep (21.1 cm)Weight: 1.7 pounds (0.77 kg); rack-mounting installation kits add approximately 0.2 pounds (0.09 kg)Deployment: intended for tabletop applications. Four optional mounting kits are also available:RMBK-10 allows one unit to be mounted in a panel cutout or on a flat surfaceRMBK-11 allows one unit to be mounted in the left- or right-side of one space (1U) of a standard 19-inch rackRMBK-12 allows two units to be mounted in one space (1U) of a standard 19-inch rackRMBK-13 allows one unit to be mounted in the center of one space (1U) of a standard 19-inch rackDC Power Supply Option: Studio Technologies’ PS-DC-02 (100-240 V, 50/60 Hz, input; 12 volts DC, 1.5 A, output), purchased separately Studio Technologies M545DC Dante Intercom Interface.

Similar products

Best offer 1 544,13 USD
Go to offer