Studio Technologies
Studio Technologies M545DC Dante Intercom Interface
☆☆☆☆☆
(0 reviews)
MPN: M545DC|Studio Technologies
Lowest price (incl. delivery)
1 544,13 USD
- Offers
- 1
- Last updated
- 2 mesi fa
| Venditore | Product price | Delivery | Totale | Disponibilità | Updated | |
|---|---|---|---|---|---|---|
| Full Compass Systems | Product price 1 525,13 USD | Delivery 19,00 USD | Totale 1 544,13 USD | Disponibilità Limited | Updated 3 mesi fa | View offer |
I prezzi e la disponibilità possono variare. Ultimo aggiornamento: 24.08.2026 05:56.
MPN
M545DC|Studio Technologies
Brand
Studio Technologies
Studio Technologies
0,0
☆☆☆☆☆
0 reviews
5★
0%
4★
0%
3★
0%
2★
0%
1★
0%
Product reviews
No reviews yet — be the first!
The Model 545DC Intercom Interface integrates two analog party-line (PL) intercom circuits and their user devices into Dante® audio-over-Ethernet applications. This cost-effective, reliable, and user-friendly solution is commonly used in theater, entertainment, and education. The Model 545DC directly supports both analog party-line (PL) and Dante and is fully compatible with Clear-Com®'s single-channel analog party-line (PL) products. Two hybrid circuits with automatic nulling action deliver exceptional audio quality and separation of send and receive audio. A simple Ethernet connection suffices for connecting the Model 545DC to Dante-compatible devices.Studio Technologies Features:Dante audio-over-Ethernet technologyIntegrated party-line (PL) intercom power sourcesAnalog hybrids with auto null capabilityInput and output level meteringExcellent audio qualityUses STcontroller for monitoring and configurationPoE and 12 volts DC poweringTable-top, portable, or optional rack-mount useStudio Technologies Specifications:Network Interface:Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) not supported)Power-over-Ethernet (PoE): Per IEEE 802.3afData Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s not supported)General Audio:Frequency Response (PL to Dante): –0.3 dB @ 100 Hz (–4.8 dB @ 20 Hz), –2 dB @ 8 kHz (–2.6 dB @ 10 kHz)Frequency Response (Dante to PL): –3.3 dB @ 100 Hz (–19 dB @ 20 Hz), –3.9 dB @ 8 kHz (–5.8 dB @ 10 kHz)Distortion (THD+N):Signal-to-Noise Ratio: >65 dB, A-weighted, measured at 1 kHz, Dante input to PL interface pin 2 (73 dB, PL interface pin 3)Party-Line (PL) Intercom Interfaces: 2Type: single-channel analog PL (XLR pin 1 common; XLR pin 2 DC; XLR pin 3 unbalanced audio)Compatibility: single-channel PL intercom systems such as those offered by Clear-Com®Power Source, XLR Pin 2: 28 volts DC, 150 mA maximumImpedance, XLR Pin 3 – Local PL Power Not Enabled: >10 k ohmsImpedance, XLR Pin 3 – Local PL Power Enabled: 200 ohmsAnalog Audio Level, XLR Pin 3: –14 dBu, nominal, +7 dBu maximumCall Light Signal Support, XLR Pin 3: DC voltage on pin 3; detects at >= 5 5 volts DC nominal; generates at 16 volts DC nominalMic Kill Signal Support, XLR Pin 2 – Local Power Enabled: momentary break in DC voltageParty-Line (PL) Hybrids: 2Topology: 3-section analog circuitry compensates for resistive, inductive, and capacitive loadsNulling Method: automatic upon user initiation, processor implements digital control of analog circuitry; settings stored in non-volatile memoryNulling Line Impedance Range: 120 to 350 ohmsNulling Cable Length Range: 0 to 3500 feetTrans-Hybrid Loss: >55 dB, typical at 800 HzMeters: 4Function: displays level of audio input and output channelsType: 5-segment LED, modified VU ballisticsConnectors:Party-Line (PL) Intercom: two, 3-pin male XLREthernet: Neutrik etherCON RJ45 jackExternal DC: 4-pin male XLRUSB: type A receptacle (used only for updating application firmware)Configuration: requires Studio Technologies' STcontroller software applicationSoftware Updating: USB flash drive used for updating application firmware; Dante Updater application used for updating Dante interface firmwareEnvironmental:Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)Humidity: 0 to 95%, non-condensingAltitude: not characterizedDimensions – Overall:8.70 inches wide (22.1 cm)1.72 inches high (4.4 cm)8.30 inches deep (21.1 cm)Weight: 1.7 pounds (0.77 kg); rack-mounting installation kits add approximately 0.2 pounds (0.09 kg)Deployment: intended for tabletop applications. Four optional mounting kits are also available:RMBK-10 allows one unit to be mounted in a panel cutout or on a flat surfaceRMBK-11 allows one unit to be mounted in the left- or right-side of one space (1U) of a standard 19-inch rackRMBK-12 allows two units to be mounted in one space (1U) of a standard 19-inch rackRMBK-13 allows one unit to be mounted in the center of one space (1U) of a standard 19-inch rackDC Power Supply Option: Studio Technologies’ PS-DC-02 (100-240 V, 50/60 Hz, input; 12 volts DC, 1.5 A, output), purchased separately Studio Technologies M545DC Dante Intercom Interface.
Similar products