Crestron HD-TXU-4KZ-111-E AV extender AV receiver White

DM® Essentials transmitter functionality designed to interoperate with a DM Essentials HD-RXU-4KZ Series receiver Point-to-point extension of a USB-C® DisplayPort™ AV signal, USB 2.0 data signals, and Ethernet signal over a CAT5e or higher cable USB-C® input with DisplayPort™ Alt Mode capability and USB 2.0 support DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals HDR10, HDR10+, and Dolby Vision® video formats Ethernet pass-through capability Compliance with HDCP 2.3 CEC (Consumer Electronics Control) pass-through capability EDID pass-through capability Compact, surface-mountable design The HD‑TXU‑4KZ‑111‑E is a DM® Essentials 4K60 4:4:4 transmitter designed to interoperate with a DM Essentials HD‑RXU‑4KZ Series receiver. A USB-C® input with DisplayPort™ Alt Mode capability enables signal extension of a DisplayPort AV signal along with USB 2.0 data. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the HD-TXU-4KZ-111-E to the DM Essentials receiver.Interoperability with a DM Lite HD-RXU-4KZ Series ReceiverFor interoperability between the HD-TXU-4KZ-111-E and an HD-RXU-4KZ Series receiver, the DM Essentials output port of the HD‑TXU‑4KZ‑111‑E must be connected to the DM Essentials input port of the HD-RXU-4KZ Series receiver.NOTE: USB 2.0 data extension is not supported if the HD-TXU-4KZ-111-E is paired with a DM Essentials receiver other than an HD-RXU-4KZ Series receiver or paired with a DMPS Essentials switcher (HD-PS Series or HD‑RX‑4K‑210‑C‑E[‑POE]).4K60 4:4:4 and HDR SupportThe HD‑TXU‑4KZ‑111‑E supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.USB 2.0 Data ExtensionTwo USB 2.0 host ports are provided on the HD‑TXU‑4KZ‑111-E, enabling connection to a wide variety of supported USB 2.0 peripheral devices.Ethernet Pass-Through CapabilityThe HD-TXU-4KZ-111-E is equipped with a 100/1000 Mbps LAN port that passes an Ethernet signal over the DM Lite connection to the receiving endpoint. The LAN port of one endpoint in the pair can be connected to an Ethernet network while the LAN port of the other endpoint can be connected directly to an Ethernet-enabled device such as a PC.Compact, Surface‑Mountable DesignCompact in design, the HD‑TXU‑4KZ‑111‑E can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑TXU‑4KZ‑111‑E can receive power from the included power pack or from the remote DM Essentials receiver. Features Product colour White Rack mounting Yes HDCP Yes HDCP version 2.3 Audio formats supported DTS, LPCM Colour depth 12 bit Frame rate 60 fps Supported graphics resolutions 1920 x 1080 (HD 1080), 2560 x 1600 (WQXGA), 3840 x 2160, 4096 x 2160 Material Metal, Polycarbonate (PC) LED indicators Activity, Link, Power CEC pass-through Yes HDCP pass-through Yes Maximum refresh rate 60 Hz High Dynamic Range (HDR) technology Dolby Vision, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus) High Dynamic Range (HDR) supported Yes Maximum transfer distance 70 m Cable types supported Cat5e Maximum resolution 4096 x 2160 pixels Type AV receiver Ports & interfaces Number of HDMI outputs 1 RJ-45 input ports 1 Ethernet LAN Yes Connectivity technology Wired Power Current 2.5 A AC input voltage 100 - 240 V Power source type AC Operational conditions Operating temperature (T-T) 0 - 40 °C Operating relative humidity (H-H) 20 - 90% Weight & dimensions Weight 550 g Height 30 mm Depth 202 mm Width 106 mm Packaging content Mounting brackets included Yes IR extender included Yes IR emitter included Yes Cables included UTP Technical details Compliance certificates CE, Federal Communications Commission (FCC) leaflet manual pdf