REVELPROG-IS Serial Programmer

REVELPROG-IS is a professional tool for serial memory programming. It supports wide range of EEPROM, FLASH and FRAM devices with I2C, SPI, 1-Wire and MICROWIRE (uWire) protocols powered with 1.0V - 5.0V voltage levels. It has integrated ZIF socket (for THT devices) and SOIC socket (for SMD devices). It has also connector for in-circuit serial programming (ICSP) with buffered I/O. Due to USB 2.0 interface memory operations are incredibly fast.

Application: serial memory programming in:
- car electronics & automotive (reprogramming modules, radio-code, immobilizers, gps navigations, mileage correction and other modules with serial EEPROM and/or FLASH memories),
- computer and notebook service (data recovery, reflashing, upgrading and programming BIOS chips in motherboards, copier & fax machines, printers, hdd & ssd sata drives etc. ),
- network service (programming and cloning optical and ethernet SFP, QSFP, XFP modules),
- RTV/AGD maintaining or repairing (TV, digital cameras, tv tuners etc.),
- and many other devices equipped with serial IIC / SPI / Microwire EEPROM and SPI FLASH chips.

Main features:
- reading / writing / erasing functions with user-friendly application interface,
- supported binary files (*.bin, *.rom, *.epp etc.) and Intel-Hex (*.hex) with possibility to load file to the buffer, edit it, calculate checksums, export changes as patterns, swap-bytes, compare with chip etc.),
- programming in socket or in external circuit (without unsoldering the chip - in system programming ISP),
- the target application device can be either powered by REVELPROG (possibility to change VPP and logic levels: 1.0V / 1.5V / 1.8V / 2.5V / 2.8V / 3.3V / 5.0V) or powered by an application with external power supply (1.0 – 5.5V),
- build in additional protection: buffered I/O pins internal connected only during programming + short circuit and overload protection (reduces the risk of damaging parts due to connection mistake),
- all I/O internal-connected only during programming,
- additional useful tools such as: user patterns, script programming (i2c & spi bus pirate), checksums, auto backups, file comparing (DiffChecker) etc.
- integrated sockets (ZIF + SOIC) with auto adaptive I/O pins reduces requirement of additional adapters,
- short programming time , e.g. WINBOND W25Q80BV (8Mb): read 0.9s (8,4Mb/s), write 3.3s (2,4Mb/s), MICRON N25Q128A (128Mb): read 12.8s (10Mb/s), write 37.6s (3,4Mb/s), please check video programming examples
- software and firmware upgrades are freely available for all users on the Internet.

Technical data:
- compatible protocols: IIC (I2C), SPI, 1-WIRE and MICROWIRE (uWire),
- supported device with 1.0V – 5.0V power supply,
- power supply and communication via USB 2.0 (hardware level, bulk transfer),
- programming with external power supply (1.0 - 5.5V),
- programming with internal power supply (1.0 - 5.0V, Imax = 100mA),
- operation speed (read/write) up to 10Mbit/s,
- ZIF-32 + SOIC-8 (150mil) integrated sockets,
- connector for in-circuit serial programming (ICSP) with buffered I/O,
- auto adaptive I/O pins connected only for programming time (Hi-Z in IDLE state),
- all I/O connected only for programming time (Hi-Z in IDLE state),
- short circuit and overload protection,
- software compatible with Windows XP, Vista, 7, 8 and 10 (32 and 64-bit),
- device designed & manufactured in EU, made in Poland.

Supported devices:
https://www.reveltronics.com/en/products/revelprog-is-serial-memory-programmer-usb#supported-chips

User manual:
https://www.reveltronics.com/en/products/revelprog-is-serial-memory-programmer-usb#manuals

Software:
https://www.reveltronics.com/en/products/revelprog-is-serial-memory-programmer-usb#software