Intel SSDPE2KE016T801 internal solid state drive 1.6 TB U.2 PCI Express 3.1 NVMe TLC 3D NAND

1.6 TB U.2 PCI Express 3.1 Read speed: 3200 MB/s 643000 IOPS Write speed: 2080 MB/s 199000 IOPS TLC 3D NAND NVMe Hardware encryption 256-bit AES Component for: Server/workstation Enhanced Power Loss Data ProtectionEnhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.Hardware EncryptionHardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.High Endurance Technology (HET)High Endurance Technology (HET) in SSD's combines Intel® NAND Flash Memory silicon enhancements and SSD system management techniques to help extend the endurance of the SSD. Endurance is defined as the amount of data that can be written to an SSD during its lifetime.Temperature Monitoring and LoggingTemperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.End-to-End Data ProtectionEnd-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back. Features Temperature monitoring and logging Yes SSD ARK ID 140103 Market segment Server Mean time between failures (MTBF) 2000000 h Uncorrectable Bit Error Rate (UBER) < 1 per 10^17 bits read SSD temperature monitoring Yes Enhanced Power Loss Data Protection technology Yes End-to-End Data Protection Yes Write latency 18 µs Read latency 77 µs Sequential latency - write (up to) 18 µs Sequential latency - read (up to) 12 µs Random latency - write (up to) 20 µs Random latency - read (up to) 95 µs Random write (100% span) 199000 IOPS Random read (100% span) 643000 IOPS Random write (4KB) 199000 IOPS Random read (4KB) 643000 IOPS Write speed 2080 MB/s Read speed 3200 MB/s Security algorithms 256-bit AES Hardware encryption Yes Component for Server/workstation Memory type TLC 3D NAND NVMe Yes Interface PCI Express 3.1 SSD form factor U.2 SSD capacity 1.6 TB Power Power consumption (idle) 5 W Power consumption (write) 14 W Power consumption (read) 14 W Brand-specific features Intel® Smart Response Technology No Intel® Remote Secure Erase No Intel High Endurance Technology (HET) Yes Intel® Rapid Start Technology No Weight & dimensions Weight 139 g Width 15 mm Operational conditions Operating / non-operating shock 1000G (0.5ms) Non-operating shock 100 G Operating shock 1000 G Non-operating vibration 3.13 G Operating vibration 2.17 G Minimum operating temperature 0 °C Maximum operating temperature 55 °C Operating temperature (T-T) 0 - 55 °C Other features Product codename Cliffdale Refresh Product series Intel® SSD DC P4610 Series Product family Data center SSD SSD weight 139 g Launch date Q2'18 Drive capacity 1.6 TB SSD power consumption (active) 14W SSD shock 1000G (0.5ms) Last change 63903513 SSD endurance rating 12.25PBW Power consumption (active) 14 W SSD power consumption (idle) 5W Sequential reading 3200 MB/s Sequential writing speed 2080 MB/s Status Launched SSD hardware encryption AES 256 bit Logistics data Harmonized System (HS) code 84717070 Export Control Classification Number (ECCN) 5A992C Commodity Classification Automated Tracking System (CCATS) G162706