Perle SRS-1110-GST05 network media converter Internal 1000 Mbit/s 850 nm Multi-mode White, Grey

1000 Mbit/s 1000 m 850 nm 1000BASE-SX Ethernet LAN (RJ-45) ports: 1 Multi-mode Fiber ports quantity: 2 ST 62.5/125,50/125 µm Internal IP20 DIN rail mounting White, Grey SRS-1110-G DIN Rail Media ConvertersPerle SRS-1110-G DIN Rail Media Converters transparently connect UTP CAT5/6/7 copper to Gigabit dual or single fiber in electric utility and power substation environments. With an extended operating temperature range of -40°C to +75°C and advanced electrical certifications for IEC 61850-3, IEEE1613 and EN 61000-4-16, these fiber to Ethernet converters meet all requirements necessary to operate safely in the harsh electrical environments associated with power utility and substation deployments. The SRS Media Converters are also designed to operate in hazardous industrial locations. With numerous certifications, including ATEX Class 1 Zone 2 and ANSI/ISA 12.12.01 Class 1 Division 2, you are ensured safe and reliable operation in locations where flammable gases, liquids or vapors are handled, processed or used.Extend the data transmission distance of IP-based devices by connecting their 10/100/1000Base-T copper interface to Gigabit fiber.Extend the distance of an existing industrial network by linking CAT5/6/7 cabling to multimode or single mode fiber.Extend the distance between two copper-based devices or networksProtect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber in industrial plants.SRS-1110 Media Converters are also available with support for an SFP slot.Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Pause which make the end to end link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make SRS-1110-G Rate Converting Media Converters the smart choice for IT professionals. Network Maximum data transfer rate 1000 Mbit/s Converter input interface 10Base-T, 100Base-T, 1000Base-T Converter output interface 1000Base-X Ethernet interface type Fast Ethernet, Gigabit Ethernet Fiber ethernet cabling technology 1000BASE-SX Auto MDI/MDI-X Yes Auto-negotiation Yes Duplex system Full, Half Cable types supported Cat5, Cat6, Cat7 Performance Maximum transfer distance 1000 m Wavelength 850 nm Fiber mode structure Multi-mode Fiber cable diameters supported (core/cladding) 62.5/125,50/125 µm Tx power (min) -9.5 dBmW Tx power (max) -4 dBmW Rx power (min) -17 dBmW Rx power (max) -3 dBmW Buffer size 1000 KB Mean time between failures (MTBF) 577432 h Features Internal Yes DIN rail mounting Yes International Protection (IP) code IP20 Housing material Plastic Product colour White, Grey LED indicators Yes Ports & interfaces Ethernet LAN (RJ-45) ports 1 Fiber ports quantity 2 Fiber optic connector ST Power Input voltage 12 - 48 V Input current 0.09 A Power consumption (typical) 2.16 W Weight & dimensions Width 22.5 mm Depth 100 mm Height 114 mm Weight 120 g Operational conditions Operating temperature (T-T) -40 - 75 °C Storage temperature (T-T) -40 - 85 °C Operating relative humidity (H-H) 5 - 90% Storage relative humidity (H-H) 5 - 95% Operating altitude 0 - 3048 m Packaging data Package width 30 mm Package depth 105 mm Package height 145 mm Package weight 170 g Certificates Compliance certificates ATEX, ANSI, Federal Communications Commission (FCC), UL, CSA, CE, Trade Agreements Act (TAA), National Defense Authorization Act (NDAA) Other features MAC address table 1026 entries leaflet manual pdf EU Declaration of Conformity