PLANET IGS-500T network switch Unmanaged Gigabit Ethernet (10/100/1000) Blue

Physical Port 5-port 10/100/1000BASE-T RJ45 with auto-MDI/MDI-X function Layer 2 Features Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standard Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High-performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth Backplane (switching fabric): 10Gbps Integrated address look-up engine, supporting 4K absolute MAC addresses 9K jumbo packet size Automatic address learning and address aging CSMA/CD Protocol Industrial Case and Installation IP30 metal case DIN rail and wall-mount design 12 to 48V DC, redundant power with polarity reverse protect function and connective, removable terminal block for master and slave power; 24V AC power support Supports 6000 VDC Ethernet ESD protection Supports -40 to 75 degrees C operating temperature Free fall, shock-proof and vibration-proof for industries Compact Size for More Practicability and ConveniencePLANET IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch, suitable for industrial use, features 5 1000Mbps auto-negotiation ports, IP30-rated rugged but compact case and a wide-ranging redundant power system (12~48V DC or 24V AC). The IGS-500T is able to operate in any harsh environment with operating temperature ranging from -40 to 75 degrees C. As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually in demand, the IGS-500T is especially designed to make the deployment of an industrial network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable when it comes to fast data and power transmission. Low Power Consumption for Green NetworkingThe IGS-500T, adopting the advanced green networking technology, provides the link-on cable length power saving and link-down power saving methods. These features make the IGS-500T consume very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently. With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the IGS-500T can automatically detect cable link status and network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active. Dual Power Input for High Availability Network SystemThe IGS-500T features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the IGS-500T via power supply 2 alternatively without any loss of operation.High Switch PerformanceThe IGS-500T offers a high-performance switch architecture. With the 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 10Gbps and the 4K MAC address table, the IGS-500T can perform wire-speed packet transfer without the risk of packet loss. The flow control function enables the IGS-500T to provide fast and reliable data transfer. Plug and PlayAll of the RJ45 copper interfaces in the IGS-500T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables. Management features Switch type Unmanaged Ports & interfaces Gigabit Ethernet (copper) ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Basic switching RJ-45 Ethernet ports quantity 5 Network MAC address auto-aging supported Yes Flow control support Yes Auto MDI/MDI-X Yes Auto-negotiation Yes MAC address auto-learning supported Yes Full duplex Yes Cable types supported Cat3, Cat4, Cat5, Cat5e, Cat6 10G support No Networking standards IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x Data transmission Packet buffer memory 1 MB Jumbo frames 9000 Jumbo frames support Yes Store-and-forward Yes Throughput 7.4 Mpps Switching capacity 10 Gbit/s MAC address table 4000 entries Design Wall mountable Yes International Protection (IP) code IP30 DIN rail mounting Yes LED indicators Yes Housing material Metal Product colour Blue Power Power consumption (typical) 3.6 W DC input voltage 24 V Redundant power supply (RPS) support Yes Power over Ethernet (PoE) Power over Ethernet (PoE) No Operational conditions Heat dissipation 12.35 BTU/h Storage relative humidity (H-H) 5 - 90% Operating relative humidity (H-H) 5 - 90% Storage temperature (T-T) -40 - 75 °C Operating temperature (T-T) -40 - 75 °C Weight &