Studio Technologies MODEL-392 Visual Indicator Module

Studio Technologies' multi-purpose MODEL-392 Visual Status Indicator is a versatile RGB LED array housed in a trapezoidal lens that can be used for a variety of alert or reference functions. It can serve as a standard "On Air" light for recording or broadcast studios, a room occupied light or a call signal indicator.The 392's PoE (Power over Ethernet) capability allows it to be used for an even wider range of applications. The unit also supports Dante audio over Ethernet technology and can be configured as a three-segment (green, yellow, red) audio level indicator that reacts to varying intensity.Setup and configuration require little time or effort, thanks to the rear panel RJ45 network interface. A single twisted pair Ethernet cable delivers bi-directional Dante audio, PoE, and control data from the STcontroller app, eliminating time-consuming and costly multi-cable runs.Studio Technologies MODEL-392 Includes:1 x Leviton® S746-N wall plate1 x 2-gang, 1-Decora opening, centered1 x 302 stainless steel material with protective film4 x 5/16-inches wide by 4 ½-inches tall (two 6-32 thread mounting screws included)Studio Technologies MODEL-392 Features:Dante audio-over-Ethernet technologyGeneral-purpose visual indicator with RGB LEDsOn, flashing, and audio level displaysResponds to high-frequency (18-23 kHz) call, UDP commands, and PCM audio dataMounts in a US-standard 2-gang electrical boxSingle Decora-style lens opening dimensionsConfigured using STcontroller applicationPower-over-Ethernet (PoE) poweredStudio Technologies MODEL-392 Specifications:Power Source:Power-over-Ethernet (PoE): class 1 (very low power, ≤3.84 watts) per IEEE® 802.3afNetwork Audio Technology:Type: Dante audio-over-EthernetAES67-2013 Support: yes, selectable on/offDante Domain Manager (DDM) Support: yesBit Depth: up to 24Sample Rate: 48 kHzPull Up/Down Support: noDante Receiver (Input) Channels: 1Dante Receiver (Input) Nominal Level: –20 dBFSNetwork Interface:Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) not supported)Power-over-Ethernet (PoE): Per IEEE 802.3af (class 1 (very low power, ≤3.84 watts))Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s not supported)Visual Display:Technology: red/green/blue (RGB) LEDs (qty 11), within polycarbonite lens assemblyOff Color: single, adjustable (choices include standard colors and operating system color picker)Off Intensity: adjustable from among three values and offOn Color: single, adjustable (choices include standard colors and operating system color picker)On Intensity: adjustable from among three valuesOn Action: adjustable from among four choicesVisual Display Off/On Control: manual control via STcontroller, UDP command, tone detect (TOX), and input audio level meterUDP Command Function: UDP command provided by way of Ethernet interfaceTone Detect (TOX) Function:Detection Method: in-band toneTone Characteristics: 18-23 kHz, nominalMinimum Level: –27 dBFS, nominalDetect Time: 10 milliseconds, minimumInput Audio (Level Meter) Function::Function: responds to level of PCM audio data within Dante receiver (input) channelColors and Level Thresholds: green lights at –40 dBFS (range of –40 dBFS to –16 dBFS); yellow lights at –15 dBFS (range of –15 dBFS to –6 dBFS); red lights at –5 dBFS (range of –5 dBFS to 0 dBFS)Intensity: increases within each level rangeConnectors:Ethernet: RJ45 jackUSB: type A receptacle (used only for updating application firmware)Configuration: requires Studio Technologies' STcontroller software applicationSoftware Updating: USB flash drive used for updating application firmware; Dante Updater application for updating Dante interface firmwareEnvironmental:Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)Humidity: 0 to 95%, non-condensingAltitude: not characterizedDimensions (Overall):3.25 inches wide (8.26 cm)4.14 inches high (10.52 cm)3.08 inches deep (7.82 cm)Dimensions (Rear Depth):1.172 inches (0.46 cm)Weight: 0.40 pounds (0.18 kg)Mounting: intended for installation in a US-standard 2-gang electrical box (four 6-32 thread machine screws included). Polycarbonite lens compatible with 1-Decora® opening.Included Accessory: Leviton® S746-N wall plate, 2-gang, 1-Decora opening, centered, 302 stainless steel material with protective film, 4 5/16-inches wide by 4 ½-inches tall (two 6-32 thread mounting screws included) Studio Technologies MODEL-392 Visual Indicator Module.