Kellermann R1 Indicator Relay

The R 1 flasher relay has very small dimensions and flashes independently of load at a steady 75 pulses per minute. It also has a connection available for the flasher dashboard light. It is easily installed into the feed to the indicator switch or can be swapped with the original 2-3 pole flasher relay. It is therefore suitable for all motorcycles with indicator switches. Should the change to LED indicators result in the non-intentionally activated indicators also flashing; then the indicator control light must also be connected to the R 1 relay. The ‘hazard warning’ effect will then be effective All necessary components required for installation are included.ECE-tested• Simple installation in feed to the indicator switch or swap the original 2-3 pole flasher relay• Connection to indicator control light is also possible• Restricts the accompanying flashing of non-activated indicators• Load-independent / steady flash rate• Switching capacity 0-50W by 12V/ 0-24W by 6V• Very small dimensions 22 x12 x 6 mm (L/W/H)• Suitable for indicator switches• Suitable for 6 and 12-volt DC applications• Functional features: Flasher relay• Height: 6 mm• Indicator frequency: 6V and 12V• Length (without thread/fastening): 22 mm• Technology: LED• Wide: 12 mm- Made in GermanyManufacture Part Number: 123.965